EDT HRC Mezz – PCI/e, E4, STS3, OC3/STM1 – Zerif Technologies Ltd.

EDT HRC Mezzanine board with E4 / STS3 electrical and OC3 / STM1 optical signals

The EDT HRC is a mezzanine board that pairs with a PCI/e main board for high speed data transfer. It supports both E4 or STS3 electrical signals and OC3/STM1 optical signals in numerous combinations. The four connector slots all support an electrical BNC 75-W CMI coaxial interface, or an optical LC 1310 nm NRZ single-mode transceiver. The BNCs can be set by programmable control as either input or output. Bi-directional operation is possible on two channels.

Product Data

HRC Mezzanine for PCI / PCIe main board supporting E4 / STS3 and OC3 / STM1 combination equipped with 4x BNC 75-W CMI coax / LC 1310 nm connectors by EDT.
HRC Mezzanine for PCI / PCIe main board: E4 / STS3 and OC3 / STM1 optical combination.