This 1U rackmount server from the BittWare TeraBox series accomodates a single BittWare XUPP3R board with a Xilinx UltraScale+ Virtex VU9P FPGA.
4x 100/40/25/10G QSFPs plus 20x 10G SFPs are connected on a custom expansion board to the PCIe FPGA board for fast network acceleration.
The high density BittWare TeraBox 1100L in a 1U chassis occupies only a single rack space, and all ports are accessible from the front panel.
The host includes up to a Xeon E5-2600. 4x DIMMs allow 64 GB memory. Two 800W power supplies are provided for redundancy.
The TeraBox 1100L custom front panel has motherboard management interfaces and allows access to the GbE ports on the BittWare board and the expansion board. An embedded management system, accessible via command line, allows you to configure, manage, and monitor the expansion board and its interfaces.
BittWare’s FPGA boards are equipped with a Board Management Controller (BMC), which accepts IPMI 2.0 commands. BittWare’s BittWorks II Toolkit is used to program the FPGA over USB, monitor board power and temperature, and reprogram the onboard clocks. You can also to set points to shut down the board if it overheats, to access JTAG, and for remote access of the software tools.
Your TeraBox FPGA server is delivered pre-configured and tested, including setup and installation of your FPGA boards and associated hardware, your choice of operating system, and the development tools.
SuperMicro SuperChassis 515-R407
Mini ITX motherboard
BittWare expansion board
BittWare XUPP3R PCIe board
Product Data