The midrange BittWare 180 – Virtex-5 LX155 FPGA board is optimized for 10G network monitoring. In a NIC mechanical form factor, the BittWare Virtex-5 LX155 is an FPGA card with XFP network port supporting 10 GbE and OC192 SONET.
More…The BittWare AMC-420 conforms to the AMC, AdvancedTCA, MicroTCA formats and has an FMC Site. Powered by a Xilinx Virtex-6 LX240T FPGA, or SX315T as an option. Memory is 36 MB QDR-II+ SRAM and 1 GB DDR3 SDRAM.
More…Please contact us for more information about the BittWare VXS-610, VXS-620, VXS-621, and BenNUEY-VME64-VXS products.
More…Please contact us for more information about the BittWare XMC-210, XMC-220, XMC-230, XMC-231, and XMC-240 products.
More…These BittWare cards run embedded PCI and PCI-104 and include a motherboard, modules and software. They are well suited to rapid prototyping and deployment. The motherboards are PCI Express, PCI-X, PCI, PCI-104 and VME/VXS compatible.
More…The BittWare 520 is a PCIe accelerator board build using the Intel Stratix 10 FPGA with four 100G QSFP Ethernet ports and a PCIe Gen3 x16 host interface. With fast, independent optical I/O, establish dense, directly coupled FPGA clusters.
More…The BittWare 385C is a low profile FPGA computing and I/O platform achieving 1.5 Tflops peak. This Accelerator Card features 8-lane PCI-Express (PCIe Gen3 x8), dual QSFP28 100 GbE, and 8 GB DDR3 on-card memory.
More…BittWare’s A10P3S is a 3/4-length PCIe x8 card based on the Altera Arria 10 GX/SX FPGA and SoC. The Arria 10 boasts high densities and a power-efficient FPGA fabric married with a rich feature set including high-speed transceivers up to 28 Gbps, hard floating-point DSP blocks, and embedded Gen3 PCIe x8.
More…BittWare’s A10PED is a full-length PCIe x8 card featuring two Intel Arria 10 GX FPGAs. The Arria 10 boasts high densities and a power-efficient FPGA fabric married with a rich feature set including high-speed transceivers up to 15 Gbps, hard floating-point DSP blocks, and embedded Gen3 PCIe x8.
More…The BittWare 250S runs a Xilinx Kintex KU060 FPGA (FFVA1156 in default configuration speed grade 2). It is a fully programmable, in-line storage, localized FPGA accelerator. This high performance PCIe 8-lane Gen-3-based flash SSD, has up to two M.2 NVMe SSDs and DDR4.
More…The BittWare 287 with two Xilinx Kintex-7 325T FPGAs comes in a GPU mechanical form factor. This board has four SFP+ network ports. Memory is 6 banks of QDR-II SRAM and 2 banks of DR2 SDRAM.
More…BittWare’s XUPSV2 is a low-profile PCIe card featuring a very large FPGA — the Xilinx Virtex UltraScale+ VU9P, which offers up to 2.5 million logic elements. The board features 2x 40/100 Gbps Ethernet (8x 25/10 GbE through breakout cables) for high-speed networking along with up to 16GBytes of DDR4 SDRAM.
More…BittWare’s XUSP3R is a 3/4-length PCIe x8 card based on the Xilinx Virtex UltraScale FPGA. The high-performance UltraScale devices provide increased system integration, reduced latency, and high bandwidth for systems demanding massive data flow and packet processing.
More…BittWare’s XUSP3S is a 3/4-length PCIe x8 card based on the Xilinx Virtex or Kintex UltraScale FPGA. The high-performance UltraScale devices provide increased system integration, reduced latency, and high bandwidth for systems demanding massive data flow and packet processing.
More…BittWare's XUSPL4 is a low-profile PCIe x8 card based on the Xilinx Virtex or Kintex UltraScale FPGA. The high-performance UltraScale devices provide increased system integration, reduced latency, and high bandwidth for systems demanding massive data flow and packet processing.
More…In a NIC mechanical form factor, the BittWare 385 – Altera Stratix V A7 is a network-enabled FPGA card with two SFP+ 10 GbE ports and 8 GB DDR3 SDRAM. Typical applications are ≤ 25 W.
More…In a NIC mechanical form factor, the BittWare 385 – Altera Stratix V D5 is a network-enabled FPGA card with two SFP+ 10GbE ports and 8GB DDR3 SDRAM. Typical applications are ≤ 25 W.
More…The Stratix V AB is the largest Altera FPGA, delivering maximum performance. In a GPU mechanical form factor, the BittWare 395 – Altera Stratix V AB is a network-enabled FPGA card with four SFP+ ports with clock/data recovery support numerous protocols and speeds.
More…The Stratix V D8 is the largest Altera FPGA, delivering ultimate performance. In a GPU mechanical form factor, the BittWare 395 – Altera Stratix V D8 is a network-enabled FPGA card with four SFP+ ports with clock/data recovery and support for numerous protocols and speeds.
More…BittWare's S5PE-DS is a PCIe x16 card featuring two high-bandwidth, power-efficient Altera Stratix V GX or GS FPGAs. Designed for high-end applications, the Stratix V provides a high level of system integration and flexibility for I/O, routing, and processing.
More…BittWare's S5PCIe-HQ (S5PH-Q) is a half-length PCIe x8 card based on the high-bandwidth, power-efficient Altera Stratix V GX or GS FPGA. Designed for high-end applications, the Stratix V provides a high level of system integration and flexibility for I/O, routing, and processing.
More…BittWare’s S5-PCIe-F (S5PE-F) is a PCIe x8 card based on the high-bandwidth, power-efficient Intel Stratix V GX/GS FPGA. Designed for high-end applications, the Stratix V provides a high level of system integration and flexibility for I/O, routing, and processing.
More…BittWare’s S5-6U-VPX (S56X) is a rugged 6U VPX card based on the high-bandwidth, power-efficient Intel Stratix V GX/GS FPGA. Designed for high-end applications, the Stratix V provides a high level of system integration and flexibility for I/O, routing, and processing.
More…BittWare's A5-PCIe-L (A5PL) is a low-profile PCIe x8 card based on the Intel Arria V GZ FPGA. The high-performance, power- and cost-efficient Arria V GZ provides a high level of system integration and flexibility for I/O, routing, and processing.
More…BittWare's A5-PCIe-S (A5PS) is a low-profile PCIe x8 card based on the Intel Arria V GZ FPGA. The high-performance, power- and cost-efficient Arria V GZ provides a high level of system integration and flexibility for I/O, routing, and processing.
More…Based on Altera’s Stratix IV GX FPGA, BittWare’s 4S-XMC (4SXM) is a single-width XMC, designed to provide powerful FPGA processing and high-speed serial I/O capabilities to VME, VXS, VPX, cPCI, AdvancedTCA, or PCI Express carrier boards.
More…BittWare’s S4-3U-VPX (S43X) is a commercial or rugged 3U VPX card based on the high-density, low-power Altera Stratix IV GX FPGA. The Stratix IV GX is designed specifically for serial I/O-based applications, creating a completely flexible, reconfigurable VPX board.
More…Based on Altera’s Stratix IV GX FPGA, BittWare’s S4-AMC (S4AM) is a mid- or full-size, single wide AdvancedMC that can be attached to AdvancedTCA carriers or other cards equipped with AMC bays, and used in MicroTCA systems.
More…BittWare’s D4-AMC (D4AM) features the I/O processing power of two Altera Stratix IV FPGAs. The D4AM is a mid- or full-size, single wide AdvancedMC that can be attached to AdvancedTCA carriers or other cards equipped with AMC bays, and used in MicroTCA systems.
More…The BittWare TeraBox is an ultra high-performance FPGA platform used for network packet processing (NPP) and high performance computing (HPC).
More…The BittWare Accelerated Compute Node consists of up to four BittWare 520C FPGA Accelerator Cards which are mounted in a Dell EMC PowerEdge C4140 1U Server.
More…The BittWare FPGA MicroNode / FPGA Accelerator is an energy efficient compact Linux Edge-computer with an Intel Arria-10 SoC SX660 and dual-core ARM Cortex A9. This Edge-computer has one 4 GB (2133 MT/s) bank of DDR4 SDRAM for FPGA fabric and one 2 GB (2133 MT/s) bank of DDR4 SDRAM for ARM processors. BSP Board Support Packages included.
More…The e4 chassis by LDA Technologies is a unique solution that transforms any FPGA-based PCIe card into a high-end networking device.
More…The BittWare TeraBox 5000TT is a 5U serial expansion chassis for 8x BittWare double-width FPGA PCIe cards that can be connected to a BittWare FPGA server to connect multiple FPGA boards to the same host.
More…BittWare’s FPGA boards are equipped with a Board Management Controller (BMC), which accepts IPMI 2.0 commands. BittWare’s BittWorks II Toolkit is used to program the FPGA over USB, monitor board power and temperature, and reprogram the onboard clocks.
More…The TeraBox 4000S in a SuperMicro 4029GP-TRT chassis gives high density of compute and network acceleration in a 4U rack mount form factor. This server delivers the power of eight BittWare double width FPGA cards, or 16 low profile boards.
More…The BittWare TeraBox 2000H integrates one of the world’s highest performance servers from HPE with the latest generation of BittWare FPGA accelerators to help customers address the most demanding data center applications.
More…The BittWare 250-M2D is an FPGA-based Computational Storage Processor (CSP) designed to meet the draft M.2 Accelerator Module Hardware Specification standard. It is intended to operate in Glacier Point carrier cards for Yosemite servers. These feature-rich, dense servers are favored by hyperscale and cloud companies striving to improve the performance density and energy-efficiency of machine learning platforms.
More…The Terabox 200DE enables world-class FPGA acceleration to be deployed in the more challenging, harsh environments demanded of edge applications with an extended temperature range of 5C to 40C. The 200DE is NEBS compliant, 2U short-depth server with an extended operating temperature range based on the new DELL PowerEdge™ XE2420.
More…The TeraBox 1400B in a custom chassis by BittWare gives the highest density of compute and network acceleration in a 1U rack mount form factor.
More…The Bittware 520R-MX FPGA PCIe Accelerator Board is optimized for sensor processing applications with massive real-time data ingest requirements. The FPGA is a Stratix 10 MX2100 with integrated HBM2 memory and 48 optical links for 480 Gbps Optical Input high-speed input to the FPGA, and OCuLink connectors allow for expansion.
More…