This 1U rackmount server is the most economical of the BittWare TeraBox series, accommodating a single FPGA board. All BittWare PCIe cards are compatible: Xilinx UltraScale+, Intel Arria 10, and Intel Stratix 10.
The server has 8 QSFP cages for 8x 100G or 32x 10/25G configurations, and occupies only a single rack space.
The host includes up to a Xeon E3-1200. 4x DIMMs allow 64 GB memory. Two 400W power supplies are provided for redundancy.
The TeraBox 1000S supports a single- or dual-wide BittWare PCIe FPGA board. Board specs can be extended to 512 GBytes of DDR4. UltraScale+ boards feature SEP or SlimSAS connectors, which can be used with an adapter for an additional 4x 100 Gbs.
BittWare’s FPGA boards are equipped with a Board Management Controller (BMC), which accepts IPMI 2.0 commands. BittWare’s BittWorks II Toolkit is used to program the FPGA over USB, monitor board power and temperature, and reprogram the onboard clocks. You can also to set points to shut down the board if it overheats, to access JTAG, and for remote access of the software tools.
Your TeraBox FPGA server is delivered pre-configured and tested, including setup and installation of your FPGA boards and associated hardware, your choice of operating system, and the development tools.
SuperMicro SuperChassis 515-R407
SuperMicro X11SSW-4TF motherboard