The KY-FMC-PRT Prototype board by Kaya Instruments breaks out all the signals in the LA bank from the standard FMC low pin count connector and the standard power rail and control signals. You can add standard 0.1 inch spaced components and sockets to help develop sophisticated applications. Active and passive devices can be attached. Standard control signals are available so that you can complete the interface to your carrier card. SerDes signals can be accesses via SMA connectors, which can be soldered onto either side of the prototype card.
Zerif Technologies Ltd.
Winnington House, 2 Woodberry Grove
Finchley, London N12 0DR
+44 115 855 7883